HomePod or AirPlay speaker not showing on your PC: fixes
Speakers announce themselves on your local network. If those announcements do not reach the PC, the speaker is missing from the Tonecarry panel even though it works from an iPhone. Go through these checks in order.
Start with the connection check. Tonecarry runs it on first run. It looks at the firewall rule, the Windows network profile and whether discovery works, and points you to the section below that applies.
Check in this order
- The PC and the speaker are on the same network
- Not on a guest network, no AP isolation
- The PC's network is Private, not Public
- No VPN in the way
- Mesh routers and Wi-Fi extenders
- Add the speaker by IP address
1. Same network
- Check which Wi-Fi the speaker uses. For a HomePod, it follows the iPhone that set it up: open the Home app, touch and hold the HomePod, and scroll to its Wi-Fi details.
- On the PC, click the network icon in the taskbar and check that it is connected to the same network. A PC on Ethernet is fine if the cable goes to the same router.
- If your router has separate names for 2.4 GHz and 5 GHz, try putting the PC on the same one as the speaker.
2. Guest Wi-Fi and AP isolation
Guest networks, and many dorm, hotel and office networks, use client isolation (also called AP isolation). Devices can reach the internet but not each other, so the PC can never see the speaker. Put the PC on your main network, or turn off client isolation or AP isolation in the router settings.
3. Windows network set to Public
When a network is set to Public, Windows blocks the incoming traffic that discovery needs. On your home network, set it to Private.
Windows 11
- Open Settings, then Network & internet.
- Click Wi-Fi (or Ethernet), then the properties of your network.
- Under Network profile type, choose Private network.
Windows 10
- Open Settings, then Network & Internet.
- Click Wi-Fi (or Ethernet), then your network.
- Under Network profile, choose Private.
Then check the firewall allows Tonecarry on Private networks: firewall guide.
4. VPN
Many VPN apps send all traffic through the tunnel, including discovery on your local network. Disconnect the VPN, or turn on its option to allow local network access (often called LAN access or split tunneling), then reopen the Tonecarry panel.
5. Mesh routers and extenders
Discovery uses multicast DNS (mDNS, also known as Bonjour). Some mesh systems and extenders filter it between nodes, so the speaker is visible only near some nodes.
- Look in the router app for settings named multicast, mDNS, Bonjour or IGMP snooping. Allowing multicast or mDNS usually helps.
- Restart the main router and the mesh nodes.
- If the speaker shows up in some rooms and not others, that points to the mesh.
6. Add the speaker by IP address
If discovery stays blocked, you can still connect directly.
- Find the speaker's IP address in your router's list of connected devices. Many speaker apps show it too.
- In the Tonecarry panel, choose to add a speaker by IP address and type it in.
- Give the speaker a fixed address (an address reservation or DHCP reservation) in the router, so it does not change later.
Questions
The HomePod is listed but will not play. Is that the same problem?
No. If the HomePod is listed but refuses or hangs, look at the Home app access setting and the Windows Firewall.
It works from my iPhone, so why not from the PC?
The iPhone may be on a different network than the PC, or the PC network may be set to Public, which blocks discovery. Sections 1 and 3 above cover both.
Free download with every feature, limited to 15 minutes per connection. Tonecarry Full removes the limit: a one-time purchase of US$2.99, no subscription.
Last updated November 18, 2026. Still stuck? Contact support.
Other guides
- How to connect a HomePod to a Windows PCPlay your PC sound on a HomePod, step by step
- How to AirPlay audio from Windows 11 and Windows 10Windows has no AirPlay button. How to send PC sound anyway
- Allow Speaker & TV Access in the Home app for a PCThe Home app setting that lets a Windows PC play on HomePod
- Windows Firewall settings for AirPlay speakersAllow Tonecarry on Private networks so speakers can connect
- Pair a Windows PC with an Apple TV or Mac (AirPlay code)Type the 4-digit code, and set up AirPlay Receiver on a Mac
- AirPlay audio delay on Windows: lip sync and latencyWhy there is about 2 seconds of delay, and what you can do